Based on a sculptural composition of geometric objects: a vertical line, a large disc, a cone and a hemisphere. It features an innovative AC LED module, allowing the pendant to be fitted directly to mains without a driver or transformer.

For more info please visit Case

A collaboration with Formula 1 Designer John Barnard RDI, who designed the very first carbon fibre F1 race car for McLaren. The table design began as an experimental project to exploit the unique properties of carbon fibre. Our concept was to take the design of a normal table, one with legs at each extreme corner, and to push it to the absolute. The tapered legs blend smoothly into the 2mm thick wafer thin edge. Uniquely, the structural unidirectional carbon fibre is seen on the top surface. Constructed from high modulus carbon fibre formed and cured under elevated pressure and temperature in an autoclave.

For more info please visit Established & Sons

Legacy Sofa formed part of the American Hardwood Export Council project for the London Design Festival 2019. Exhibited at the Victoria & Albert Museum. I was commissioned by Ben Evans, Director of LDF to design a sofa in Red Oak for the meeting room of Alex Beard, director of the Royal Opera House. I wanted to create a delicate, graceful looking structure. Manufactured by Benchmark.

The design focus here is on the ergonomics of the mechanism. Flow is adjusted by raising and lowering the bar. Temperature is adjusted and by rotating the bar. Geometrically it is a wide line, crossing a circle.

For more info please visit RVB Belgium

Pure and simple geometric design, based on a patented adjustable lampholder which allows the marble or wood shade to be fitted after wiring. This enables ease of installation and adjustment to allow the shade to hang vertically.

For more info please visit Case

A collection of modular and free-standing cabinets. The concept was to design a cabinet with a uniform facade, unrelated to the composition of drawers and doors.

For more info please visit Punt Mobles

Solid Table Lights for Case. A low profile hand blown opal glass shade sits upon a pure cylinder of Carrara or Nero marble. A small stainless steel disc on the side of the body acts as a touch dimmer controlling the light.

For more info please visit Case

Rather than trying to hide the junction between the legs and the table top, here it is celebrated by smooth radiused components.

For more info please visit Objekten Belgium

A collaboration with Formula 1 Designer John Barnard RDI. A stool with narrow section rectangular stainless steel legs and a rotating upholstered seat. Unique PTFE bearing provides smooth movement.

For more info please visit Case

Designed to work as a single seat or multiple configurations. With or without arms and trays.

For more info please visit Punt Mobles

Machined from the central core of marble left over from the production of my Solid marble pendants. The light uses LED G9 lamps to produce a subtle diffused glow at the base. Arranged as singles and as multiples.

For more info please visit Case

I wanted to design a chair in wood, that stacked but did not look obviously like a stacking chair. Wide chair back is ergonomic and the upholstered seat is comfortable.

For more info please visit Punt Mobles

A glass two-tier low table. The lower glass shelf is the structural component which holds the chrome steel legs in position. The upper tier of glass top simply rests on the neoprene pads. Because of the weight of the glass, the small diameter pads securely grip the glass.

For more info please visit SCP

A cabinet with no handles; a simple touch initiates the opening of a door or a drawer. The face of the doors and drawers are set deep into the frame. The tall and slender legs emphasise the effect as they are a continuation of the frame which wraps around the cabinet.

For more info please visit Punt Mobles

A collection of surface mounted downlights in pure cylindrical and conical shapes. The LED light source allowed me to use delicate and flammable materials.

For more info please visit Case

A collaboration with Formula 1 Designer John Barnard RDI. Following the success of the Surface table we were commissioned to design a chair to complement the table. We set out to match the super slim aesthetic of the table, with slim legs connecting at the extreme thin edge of the seat shell. Attaching the slender tapered legs at the extreme edge required the development of some complex carbon fibre reinforcement.

For more info please visit Established & Sons

A simple shelving system with components made from pressed steel. Powder coated.

For more info please visit SCP

A collection of pedestal tables with various shaped tops. The junction between the column and the legs is a smooth blend made possible by a neat steel investment casting.

For more info please visit SCP

Born out of my personal need for a side table that would hold a stack of magazines. Simple in the extreme: two horizontal wooden boards separated by steel rods.

For more info please visit SCP

Lansdowne is a version of the Woodgate sofa for SCP London using classic buttoned upholstery to successfully blend traditional craft with modern form.

For more info please visit SCP

Ultra-simple adjustable steel storage with shelves and lacquered cabinets. The design came from a realisation that by turning the supporting slotted upright to face the supporting wall and cantilevering the shelf, the fixing slots would be concealed and a very simple system could be realised. The very first version was based on just one design of upright and one type of shelf. The system has since grown to accommodate cabinets.

An exterior luminaire for perimeter lighting. The design was heavily influenced by the work of Spanish sculptor Eduardo Chillida. I love the way he cut and manipulated massive solid sections of steel. Aptus uses the same aesthetic of a cut section to create the angle between the light head and the body. Fabricated in Corten steel which changes with the weather and seems perfect for exterior lighting.

Low profile modular sofa with plump soft feather cushions. The design is driven by the form of the seat back and arm rest which allow it to work for all possible modular layouts. Set a trend when designed in 1995.

For more info please visit SCP

Solid granite benches and seats for exterior use. Rather than try and hide the joints between the parts the design concept was to celebrate the connection through the creation of radii across all the components.